Channel Vision DVR-4N - Manual (Page 27)

-
OPERATION
.2.6 JOG SHUTTLE INFORMATION
.2.6.1 Normal Playback Mode
esired playback direction and speed level according to the above
mode when the SHUTTLE ring is returned to the center position.
Frame by Frame Playback Mode
image while the DVR is in the playback mode.
.2.6.3 Digital Zoom of PTZ camera
hen press the PTZ button.
f PTZ.
.2.6.4 Using the JOG DIAL in the MENU setup
value in MENU setup.
e MENU setup.
button to make a reversed playback from the end of recorded or played images
NOTE
Press DIR
during the real time display mode (Instant Playback).
5
5
Turn the SHUTTLE ring to the d
drawing during the playback.
The DVR will go back to pause
5.2.6.2
Press the PB/PAUSE button to get a still
Turn the
JOG DIAL in either direction continuously for playback of consecutive frames.
Press the PB/ PAUSE button again to return to the previous mode.
5
Select a pre-set single camera, and t
Turn the SHUTTLE RING to zoom in or out.
Turn the SHUTTLE RING to iris close/open o
5
Turn the JOG DIAL to modify the displayed setup
Turn the shuttle ring to set up the “SCHEDULE” in RECORD SETUP of th
SHUTTLE RING
JOG DIAL
TE Not All Functions can used by JOG DIAL
instead of the JOG DIAL.
NO
In the MENU setup, below buttons can be used
: Press this button to modify the setup value.
26