Channel Vision DVR-4N - Manual (Page 65)

-
MENU SETUP
6.5.8 DVR INITIALIZE
At the SYSTEM menu,
Press the ENTER button when the cursor is on the DVR INITIALIZE and the following screen
the cursor to “YES” and then press the ENTER button. If not, move
ess the ENTER button. Use the © , ª buttons to move the cursor.
screen, press the ESC button.
At
.
RONT port, move the cursor to “YES” and then
press the ENTER button. If not, move the cursor to “NO” and then press the ENTER button.
e the cursor.
PGRADE screen, press the ESC button.
Move the cursor to the DVR INITIALIZE using the © , ª buttons.
appears.
If you want to initialize, move
the cursor to “NO” and then pr
To exit this DVR INITIALIZE
6.5.9 FIRMWARE UPGRADE
the SYSTEM menu,
Move the cursor to the FIRMWARE UPGRADE using the © , ª buttons.
Press the ENTER button when the cursor is on the FIRMWARE UPGRADE and the following
screen appears
If you want to update firmware using the USB_F
Use the © , ª buttons to mov
To exit this FIRMWARE U
NOTE: It is possible to upload the menu setting only with a front USB port.
64