Menu setup, 2 event screen mode, 3 event check – Channel Vision DVR-4N User Manual
Page 55
MENU SETUP
6.4.1.1 CHANNEL
6.4.1.1 CHANNEL
At the MOTION DETECTION menu,
Move the cursor t
At the MOTION DETECTION menu,
Move the cursor t
o CHANNEL using © , ª buttons.
or wheel scroll of mouse.
Under Event option, move the cursor to the EVENT MESSAGE using © , ª buttons.
Select “ON” or “OFF” using the (-), (+) buttons or wheel scroll of mouse.
.4.1.2 SENSITIVITY
menu,
6.4.1.3 AREA SETUP
At the MOTION DETECTION menu,
Move the cursor to AREA SETUP using © , ª buttons.
Press the ENTER button to set the motion detection area.
Select the motion detection area using the © , ª , , ¨ buttons and then press the ENTER
button to save the area.
Turn the shuttle ring to the right to select all cells for motion detection and turn the shuttle ring to
the left to reset all area.
To exit this AREA SETUP, press the ESC button.
button to test the motion detecti n.
To exit this TEST MOTION, press the ESC button
6.4.2 EVENT SCREEN MODE
At the EVENT menu,
Move the cursor to the EVENT SCREEN MODE u ing © , ª buttons.
Select the EVENT SCREEN MODE using the (-), (+) buttons or wheel scroll of mouse.
6.4.3 EVENT CHECK
t the EVENT menu,
Move the cursor to the EVENT CHECK using © , ª buttons.
Select “ON” or “OFF” using the (-), (+) buttons or wheel scroll of mouse
54
MENU SETUP
o CHANNEL using © , ª buttons.
or wheel scroll of mouse.
Under Event option, move the cursor to the EVENT MESSAGE using © , ª buttons.
Select “ON” or “OFF” using the (-), (+) buttons or wheel scroll of mouse.
.4.1.2 SENSITIVITY
menu,
6.4.1.3 AREA SETUP
At the MOTION DETECTION menu,
Move the cursor to AREA SETUP using © , ª buttons.
Press the ENTER button to set the motion detection area.
Select the motion detection area using the © , ª , , ¨ buttons and then press the ENTER
button to save the area.
Turn the shuttle ring to the right to select all cells for motion detection and turn the shuttle ring to
the left to reset all area.
To exit this AREA SETUP, press the ESC button.
button to test the motion detecti n.
To exit this TEST MOTION, press the ESC button
6.4.2 EVENT SCREEN MODE
At the EVENT menu,
Move the cursor to the EVENT SCREEN MODE u ing © , ª buttons.
Select the EVENT SCREEN MODE using the (-), (+) buttons or wheel scroll of mouse.
6.4.3 EVENT CHECK
t the EVENT menu,
Move the cursor to the EVENT CHECK using © , ª buttons.
Select “ON” or “OFF” using the (-), (+) buttons or wheel scroll of mouse
Select the desired channel using the (-), (+) buttons
Select the desired channel using the (-), (+) buttons
6
6
A
At the MOTION DETECTION
Move the cursor to SENSI
t the MOTION DETECTION
Move the cursor to SENSITIVITY using © , ª buttons.
Select the sensitivity level using the (-), (+) buttons or wheel scroll of mous
TIVITY using © , ª buttons.
Select the sensitivity level using the (-), (+) buttons or wheel scroll of mouse.
e.
§
§
6.4.1.4 TEST MOTIO
6.4.1.4 TEST MOTION
At the MOTION DETECTION menu,
N
At the MOTION DETECTION menu,
Move the cursor to TEST MOTION using the © , ª buttons.
Press the ENTER
Move the cursor to TEST MOTION using the © , ª buttons.
Press the ENTER
oo
. .
ss
SENSITIVITY: The higher the number is, the more sensitive. 1(lowest) ~ 5(highest)
SCREEN HOLD: Keeping the current screen even if the event occurs.
EVENT FULL : Display the full screen of the channel wh h the event occurs.
EVENT MULTI : Display the multi-screen when the event occurs.
Mouse operation:
Enable Cell Setup by Mouse: Left button click (without releasing the button) and drag from the left
top to the right bottom cell.
utton click (without releasing the button) and drag from the
ETUP GRID: 30 x 24
Disable Cell Setup by Mouse: Right b
left top to the right bottom cell. AREA S
ic
A
A
54