Channel Vision DVR-4N - Manual (Page 90)

89
NETWORK VIEWER INSTALLATION
1 Click the “SETUP” bu
connecting the view screen. (It is po
tt he control menu bar to display the DVR setup screen after
ssible only for master connection.)
on to store the current setup values.
alues.
s are modified, click the “Update to DVR” button to update those values into
.8.4.1 How to download firmware
Click the “SETUP” button on the control menu bar to display the DVR setup screen after
connecting the view screen. (It is possible only for master connection.)
Click the DOWNLOAD tap and you can see the “Firmware Download” button.
Click this “Firmware Download” button and browser window to find the desired file will be
lect the downloading file and click the “OPEN” button to download.
.
Click the “STATUS” button on the control menu bar to display the DVR status after connecting
on on t
2 Click the “Save to file” butt
3 Click the “Read from file” button to reload the stored setup v
Click the “Load from DVR” button to call the current setup values from connected DVR. 4
5 Once the setup value
the DVR.
9
1
2
3
displayed.
Se 4
8.5 STATUS
NOTE
MENU setup for more information about DVR menu setup. Please refer to Chapter 6
9
1
the view screen.
9.8.6 PRINT