ProgressiveRC 6S PowerLog - Manual (Page 16)

-16-
Multifunctional Monitor & Logger PowerLog 6S
PWM OUTPUT
Manual

Auto
Setting
 PWM Output: Select【PWM Output】, and press < > and the screen shows:
<▲> or <▼> to select items, press < > button to confirm, press < >
for more than 3 seconds to return.
See details below.
1. PWM Output Manual : Select【Manual】, press <
> and the screen shows:
<▲> or <▼> to increase/decrease value, press < > button to
confirm, press < > for more than 3 seconds to return.
The fourth line displays the value setting range. If adjust range, see
details as:PWM SETTING-> PWM Adjustable Range Settings
2. PWM Output Auto : Select【Auto】, press <
> and the screen shows:
Pulse width increases automatically. When reaching the Max. value, it
shifts to the Min. value. This process goes round and round. Press
any button to start/stop the process of automatic pulse increase.
The fourth line displays the value setting range. If adjust range, see
details as:PWM SETTING-> PWM Adjustable Range Settings
3. PWM Settings: Select【Setting】, and press <
> and the screen shows:
<▲> or <▼> to select items, press < > button to confirm, press < >
for more than 3 seconds to return.
See details below.
a) PWM Adjustable Range Settings: Select【Range】, and press <
> and the screen shows:
Pulse width adjustable range settings
Setting range
STEP 0.5—10000us MIN.0—20000us MAX.0—20000us
b) PWM Auto Speed Settings: Select【Auto Speed】, and press <
> and the screen shows:
The interval time settings of pulse width increment in PWM Output
AUTO mode.
Setting range
5.0—5000.0ms (5.0ms step)
c) PWM Level Settings: Select【Level】, and press <
> and the screen shows:
【 High Level】
【
Low Level】
PWM SIGNAL LEVEL
⊙High Level

○Low Level
PWM OUTPUT SET
Range

Auto Speed
Level
PWM ADJ.RANGE
STEP 10.0 us
MIN. 1000.0 us
MAX. 2000.0 us
PWM OUTPUT AUTO
1000.0
1000.0-2000.0us
PWM OUTPUT MANU
1000.0
1000.0-2000.0us
20ms
user set
20ms
user set
PWM AUTO SPEED
Step Interval
5.0 ms