Rice Lake 880 Performance Series Indicator/Controller Operators Manual User Manual

Page 5

Advertising
background image

1

880 Operator’s Manual

About This Manual

This manual is intended for use the operator of the 880 digital weight indicators and

applies to indicators using Version 1.01 of the 880 software.

The Technical/Service manual (PN 158387) that is referred to throughout this manual

and is available online.

Manuals can be viewed or downloaded the Rice Lake Weighing Systems

website at

www.ricelake.com/manuals.

Please leave this manual with the indicator when installation and configuration are

complete.

1.0 Introduction

The 880 is a single-channel digital weight indicator housed in a panel mount

enclosure. The front panel bezel can be sealed to a NEMA 4X/IP65 rating. The front

panel consists of a 6-button keypad; a large, seven-digit, 14-segment, vacuum

fluorescent display; two-character dot-matrix annunciator field; and 16-character dot-

matrix prompt field. Features include:

• Drives up to 8 350



or 16 700

load cells

• Supports four and six wire load cell connections
• Four configurable digital inputs or outputs
• Full duplex RS-232 or half duplex RS-485 communications up to 115200 bps
• Ethernet TCP/IP interface for 10Base-T/100Base-TX network communications
• USB interface for host (type A connection) or device
• Expansion slot for one option card
• Optional DeviceNet

interface for communications network with Allen-

Bradley

®

controllers

1

• Optional Ethernet/IP interface for Allen-Bradley PLC and other Ethernet/IP

master devices

3

• Optional Profibus

®

DP interface

2

• Optional Modbus TCP interface
• Optional Profinet Interface
• Optional analog output module provides 0–10 VDC, 0-20mA or 4–20 mA

tracking of gross or net weight values

• Optional four channel relay module, dry connect 3A @ 115VAC, 3A @ 30VDC

• Available in 115 VAC and 230 VAC versions

1. DeviceNet

is a trademark of the Open DeviceNet Vendor Association.

2. Profibus

®

is a registered trademark of Profibus International.

3. EtherNet/IP

is a trademark of the Open DeviceNet Vendor Association.

Advertising