Rice Lake 880 Performance Series Panel Mount Indicator/Controller - Analog Output Card Option Installation Manual - Manual

November 2013 156858
Analog Output Card Installation
PN 131601
Use the following procedure to install the analog output card in 880 indicators:
CAUTION
WARNING Disconnect power before removing indicator backplate.
Use a wrist strap to ground yourself and protect components from electrostatic discharge (ESD) when
working inside the indicator enclosure.
1. Disconnect indicator from power source.
2. Remove all cables.
Rotate left and right hook
down away from the DIN rail.
Controller Assembly
DIN Rail Clip Bracket
Cable Assembly
DIN Hook Screwdriver Slot
Figure 1. Remove Controller Assembly
3. Rotate left and right hooks away from the DIN rail clip.
4. Carefully remove the controller box from the DIN rail.
5. Disconnect the display cable harness.