Rice Lake 920i FlexWeigh Systems - 101 - Manual (Page 7)

Operation Menu Softkeys 3
Figure 1-1. 920i Front Panel
The set of softkeys shown on the display is determined by the indicator configuration and program.
Softkey Default Softkey Description
Preset Softkeys - Target Weight
Dribble Weight
Preact Weight
Zero Tolerance Weight Refer to Section 4.1 on page 13 for detailed
information on these functions.
Totals Softkeys - Consecutive Number
Print Subtotals
Print Totals Refer to Section 4.2 on page 16 for detailed
information on these functions.
Time/Date Current Time/Date Time and date of 920i
System Password """"""" Setup Password Changing the password that is required for entry
into the setup menu. Setting the password to
nothing will cause the system to not prompt for a
password when the Setup Menu softkey is
pressed.
Enabling/Disabling ID#1 - ID #1 This allows the operator to log an extra data field. A
softkey will appear on the main screen to allow the
operator to enter more data (ie: formula, ID Truck,
container, operator)
Enabling/Disabling ID#2 - ID #2 This allows the operator to log an extra data field. A
softkey will appear on the main screen to allow the
operator to enter more data (ie: formula, ID Truck,
container, operator)
Filling Speeds Single Speed Single, Dual or Parallel Allows the operator to change the filling speed
operations
Auto Tare Feature Enabled Auto Tare Enabled/Disabled Allows the operator to enable/disable the auto tare
feature
Auto Print Feature Enabled Auto Print Enabled/Disabled Allows the operator to enable/disable the auto print
feature
Delay After Discharge - Delay After Discharge Allows the operator to enter a time in seconds to
delay after completion of Discharge before a new
Start input is enabled.
Test Digital I/O - Fill Complete
Slow Fill
Fast Fill Refer to Section 3.9 on page 11 for detailed
information on these functions.
Table 1-2. Configurable Softkeys
PRINT UNITS
PRESETS ID1 ID2 SETUP MENU