Rice Lake 920i Dual Channel Analog Input Card - Manual (Page 6)

6 920i Analog Input Card with Thermocouple Input Installation Instructions
Upon selecting THERM as the analog input signal and pressing Enter , a previously hidden parameter PROBE will be
displayed. Scroll down to view and select the desired probe type. The thermocouple calibration values are stored in
the
920i so no calibration is required
Figure 10 Thermocouple Temperature Menu
Temperature Setup
To set up and measure the ambient temperature inside of the indicator, select TEMP as the analog input signal.
There is no calibration required for this function.
0-20 mA Analog Input Setup
Select 0-20 mA and proceed with configuration and calibration.
Figure 11 0-20 mA Analog Input Menu
NOTE: WVAL = actual current used
MAX = maximum value for display
0-10 V and 0-100 mV Analog Input Setup
Select 0-10 V or 0-100 mV and proceed with configuration and calibration.
Figure 12 0-10 V and 0-100 mV Analog Input Menus.
4$"-&

"-(*/ 130#&
5:1&
&
5:1&
+
5:1&
,
5:1&
/
5:1&
5
7*4*#*-
5)&3.
4$"-&

"-(*/ (3"%4
5&.1
$"-*#3 ."9



N" 5)&3.


W
'03."5 %*('-5




N7
7*4*#-
4$"-&

"-(*/ (3"%4 $"-*#3



7


N7 $633&/5 5)&3. 5&.1
$0/'*( $0/'*(
4$"-&4 7&3 4&3*"-