Rice Lake 920i Programmable HMI Indicator/Controller - WLAN - Manual (Page 6)

6 WLAN Installation Instructions
this case, we’re setting up the WLAN options so press
4
and press
Enter
as shown in Figure 10.
Figure 10. Change Setup Screen
View the current configuration by pressing
Enter
from the Change Setup menu. To enter a value for a parameter,
type the value and press Enter. To confirm a current value, press Enter (without inputted parameters).
8. Enter the desired Topology for the WLAN option.
Figure 11. Topology Screen
The two choices are:
• 0 = Infrastructure
• 1 = AdHoc.
Select
0
for your choice and press
Enter
.
9. The next menu choice is Network Name as shown below.
Figure 12. Network Name Screen
Enter your wireless network name as your menu choice and press
Enter
. This identifies the network that the
wireless option will run on.