Rice Lake 920i Programmable HMI Indicator/Controller - WLAN - Manual (Page 7)

7
10. The next step is to select a level of security as shown in Figure 13.
Figure 13. Security Level Select Screen
Security levels include:
• 0 = None
• 1 = WEP (Equivalency Protection)
• 2 = WPA
Select
1
and press
Enter
.
11. The next step is to set the authentication level for the configuration as shown below.
Figure 14. Authentication Screen
Authentication choices are:
• 0 = open/none
• 1 = Shared
Select
0
= open/none and press
Enter
.