Rice Lake Counterpart Configurable Counting Indicator - Installation and Operation Manual V2.3 - Rev C - Manual (Page 57)

Configuration 51
3.7.8 Version Menu
Figure 3-22. Version Menu Layout
3.8 Test Menu
Figure 3-23. Test Menu
Parameter Choices Description
VERS SOFTWR Software version. 2.xx
REG Regulatory version. LR, V 1.XX
Table 3-18. Version Menu Parameters
Parameter Choices Description
A/D AD1
AD2
EXCVAC Gives details of current or live A/D counts as well as stored zero and span A/D values.
Shows voltage levels for signal and excitation voltages.
Table 3-19.
VERS
SOFTWR REG
V 2.0 LR, V.1.00
ID DISPLAY TEST SETUP AUDIT CALIBR SETPTS
A/D DIG I/O COMM KEYPAD SCANNER
VAL VAL VAL VAL VAL VAL VAL
SPAN mV RAW ZERO EXCVDC AD1 AD2
WARNING...
DISCONNECT
DIGITAL I/O
BEFORE
RUNNING TEST
PASS
or
FAIL
LOOP DIO 1
STATUS
DIO 2
STATUS
DIO 3
STATUS
DIO 4
STATUS
PORT1 PORT2
PASS
or
FAIL
PASS
or
FAIL
RAM
PASS
or
FAIL
TEST SCAN TO TEST