Rice Lake Counterpart Configurable Counting Indicator - Installation and Operation Manual V2.3 - Rev C User Manual
Page 86
80
Counterpart Counting Scale Indicator
Command
Description
Supported Ticket Formats
<G>
Gross weight, current scale
GFMT, NFMT, TOTALFMT,
PALFMT, CFMT, ACCFMT
HDRFMT1, HDRFMT2
<G#n>
Gross weight, scale n
<N>
Net weight current scale
<N#n>
Net weight, scale n
<T>
Tare weight in displayed units. Add four before bracket to print header
<T#n>
Tare weight, scale n
<A>
Accumulated weight, current scale
<A#n>
Accumulated weight, scale n
<AC>
Number of accumulations, current scale (5-digit counter)
<AC#n>
Number of accumulations, scale n
<AD>
Date of last accumulation, current scale
<AD#n>
Date of last accumulation, scale n
<AT>
Time of last accumulation, current scale
<AT#n>
Time of last accumulation, scale n
<UID>
Unit ID number
<CN>
Consecutive number
<C>
Piece count, current scale
<C#n>
Piece count, scale n
<NLnn>
New line (nn = number of termination (<CR/LF> or <CR>) characters)*
<SPnn>
Space (nn = number of spaces)*
<SU> or <WA>
Surpress unis. Toggle weight data format (formatted/unformatted)**
<TI>
Time
<nnn>
ASCII character (nnn=decimal value of ASCII character). Used for
inserting control characters (STX, for example) in the print stream.
<DA>
Date
<TD>
Time & Date
<H1>
Header 1
<H2>
Header 2
<IDC>
Loaded ID Code - 32 characters maximum
<IDD>
Loaded ID Description - 32 characters maximum
<IDLC>
Loaded ID Location - 12 characters maximum
<IDP>
Loaded ID Part Number - 32 characters maximum
<IDLT>
Loaded ID Lot - 32 characters maximum
<IDU>
Loaded ID Units - 1 character maximum
<IDT>
Loaded ID Tare - 9 characters maximum (range 0.0 to 9999999.0)
<IDW>
Loaded ID Unit Weight - 9 characters maximum (range 0.0 to
9999999.0)
<IDQ>
Loaded ID Quantity - 11 characters maximum (range -2000000000 to
2000000000)
<TTLV>
Totalization Value - 11 character maximum (range -2000000000 to
2000000000). When not in totalization mode, the value will be 0.
<TTLC>
Totalization Count - 4 characters maximum. When not in totalization
mode, the value will be 0.
<TTLW>
Print totalized weight. When not in totalization mode, the value will be 0.
<WA>
Suppresses all (units, decimal, leading, spaces)
<WLU>
Supress units
<WU>
Supress leading spaces
Table 7-1. Print Format Commands