Rice Lake Intercomp CS 1500 - Users Manual - Manual (Page 19)

CS1500, Users
Rev S, June, 2009
19
9. The scale shows “EE-04 EE-04 EE-04 EE-04”. Simultaneously press the ZERO and lb/kg keys.
Enter the auto off time in minutes (0 to 255). The auto off time is how long
the scale will remain ON without any activity (a key being pressed or a
change in weight). An entry of 0 turns the auto off feature OFF.
10. The scale shows “EE-05
EE-05 EE-05 EE-05”. Simultaneously press the ZERO and lb/kg keys.
Enter what unit of measure the scale should turn ON in; pounds or kilograms
(0 to 1).
Setting Units to turn ON in
0 pounds (lb)
1 kilograms (kg)
11. The scale shows “EE-06 EE-06 EE-06 EE-06”. Simultaneously press the ZERO and lb/kg keys.
This function not used by CS1500.
12. The scale shows “EE-07 EE-07 EE-07 EE-07”. Simultaneously press the ZERO and lb/kg keys.
Enter the sleep mode time in minutes (0 to 255). The sleep mode time is
how long the scale's display will remain ON without any activity (a key being
pressed or a change in weight). An entry of 0 turns the sleep mode feature
OFF. The sleep mode is designed to conserve battery life on scales with a
LED display.
13. The scale shows “EE-08 EE-08 EE-08 EE-08”. Simultaneously press the ZERO and lb/kg keys.
Enter set point 1.
SET POINT 1
This is an optional feature that allows for an external set point. When the
specified weight (set point) is reached, a logic level high will be on the set
point connection. Set points are used with some other device (e.g. alarm,
relay) in conjunction to the CS1500.
To activate a set point press the Set Point 1 (or Set Point 2) key. Enter
the weight you want the set point to activate.
SET POINT 2
Operates the same as Set Point 1.
Note: If the scale is over capacity (“OE
OE OE OE” will be displayed) the set points
will always become active.
14. The scale shows “EE-09 EE-09 EE-09 EE-09”. Simultaneously press the ZERO and lb/kg keys.
Enter set point 2.