Rice Lake Loadrunner Series Onboard Roll-Off Load Pin, 2.5 - Manual (Page 7)

Load Pin and Transducer Specification 3
2.0 Load Pin and Transducer Specification
The Rice Lake Roll Off and Dump Truck kits are typically LIFT-TO-WEIGH KITS. This means that with the hoist
in the relaxed state (on the chassis), no weight reading is available. The hoist needs to be elevated to a position
showing the correct angle on the in-cab digital display unit, approximately 4 degrees, for the weight reading
degrees to be valid and accurate.
2.1 Onboard Roll Off Kit Parts
1, 2
3, 9
7
Battery
4
5
6
8
10
Figure 2-1. Onboard System – Roll-Off Kit Illustration
Table 2-1. Onboard System – Roll-Off Kit Parts List
Item No. Part No. Description Qty
1 131204 Pin, Load Roll Off 2
2 153104 Assy, Roll Off Kit 1
153098 Ring, Roll Off 4 OD x 2
153116 Nut, Top Lock 1/2-20 NF 2
153117 Screw, Cap 1/2-20NF x 5” 2
3 131222 Inclinometer, Onboard 1
4 131200 Transducer, Hydraulic 1
5 131219 Indicator, OB3502 Channel 1
6 131221 Cable Assembly Fuse 1
7 131226 Splitter, Cable Y-Splitter 1
8 131228 Cable Assembly 15’ (5M) 1
9 158196 Bracket, Onboard Inclinometer 1
10 131800 Cable Assembly 6’ 3