Rice Lake Portable Bariatric Wheelchair Scale Single Ramp (350-5) - Rice Lake Wheel Chair Scale Technical Manual - Manual (Page 10)

6 Rice Lake Wheelchair Scale Technical Manual
4.0 Indicator Setup
To protect the indicator during transit, the indicator is shipped in a separate box inside the main shipping
container. The following sections apply to indicator connections and setup.
4.1 Load Cell Connections
The scale comes with ten feet of load cell cable which comes from the bottom of the scale (shown in Figure 3-5).
The load cell cable must be connected to the indicator display.
To gain access to the load cell connection point, do the following:
1. Unscrew and remove the tilt stand bracket from the indicator.
Figure 4-1. Remove Tilt Stand From Indicator
2. Remove the four back retaining screws as shown in Figure 4-2 and remove the back cover to the
indicator.
Figure 4-2. Remove Back Cover of Indicator
Unscrew tilt stand knobs
and remove tilt stand from
indicator