Rice Lake Portable Bariatric Wheelchair Scale Single Ramp (350-5) - Rice Lake Wheel Chair Scale Technical Manual - Manual (Page 8)

4 Rice Lake Wheelchair Scale Technical Manual
4. Stand the scale on its side so that the plastic packaging material can be removed.
Figure 3-2. Remove Plastic Wrapping off of Scale
3.4 Scale Feet Adjustment
The scale feet are shipped attached to the scale. Adjustments need to be made in order for the scale to sit properly
on the floor.
1. There must be adequate clearance between the scale base and the floor so screw each foot out counter
clockwise two full turns. This will ensure that there is enough clearance between the scale base and the
floor.
Figure 3-3. Backing Out the Scale Feet