Rice Lake Star SP298 Series Programmers Manual User Manual
Page 41
38
<ESC>
“D”
n1
n2
...
<0>
1B
44
n1
n2
...
00
Sets horizontal tab stops
Cancels all current horizontal tab stops and sets new tab stops at
columns n1, n2, etc. at the current character pitch, where n1, n2, etc.
are numbers between 1 and 255. A maximum of 16 horizontal tab
stops can be set.
The tab stops must be specified in ascending order; any violation of
ascending order terminates the tab stop list. Standard termination is
by the <0> control code.
With <ESC> “D” <0>, all horizontal tab stops are cancelled. The left
edge of the paper is always the reference point for the horizontal tab
positions, regardless of the left margin setting. When the power is
turned on, no horizontal tabs are set.
<ESC>
“1”
n
1B
6C
n
Sets left margin at column n at the current character pitch.
The left margin does not move if the character pitch is changed later.
If this function is set in the middle of a line, it will become valid
starting with the following line. When the power is turned on, the left
edge is set as the left margin.
The left margin must be at least 18 dots to the left of the right margin
and within the limits below. If the size of one character and its
spacing is larger than the print area defined by the margins, printing
is not possible and “?” is printed, instead of the character.
The value of n is between 0 and the value of the right margin - 2.
<ESC>
“Q”
n
1B
51
n
Sets right margin
Sets right margin at column n at the current character pitch.
The right margin does not move if the character pitch is changed
later.
If this function is set in the middle of a line, it will become valid
starting with the following line. When the power is turned on, the
right edge is set as the right margin.
The right margin must be within the limits below and set so that the
allowable print area is more than 18 dots. If the size of one character
and its spacing is larger than the print area defined by the margins,
printing is not possible and “?” is printed, instead of the character.
The value of n is between 2 and the value of the maximum number
of print columns.
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION