Rice Lake Star SP298 Series Programmers Manual - Manual (Page 58)

55
<ESC> “# N , n1n2n3n4” <LF> <NUL>
1B 23 N 2C n1n2n3n4 0A 00
Sets the memory switch. In order to enable changed memory switch
setting, turn the printer OFF and ON again or send printer reset
command (<ESC> “?”<LF><NUL>”) to the printer. Changed
memory switch settings are stored in EEPROM and these setting will
be stored as long as the time when they are changed again.
N
:Memory switch number (“0”, “1”, “2”, “3”, “4”, “5”)
n1n2n3n4 :Mode settings (For details see below)
1) N=0
n1 :Always “0”
n2 :Always “0”
n3 :Always “0”
n4 :Always “0”
2) N=1 (Star mode only)
n1 :Always “0”
n2 :Always “0”
(Default)
Parameter Setting “0” “1”
n3 Zero style Normal zero Slashed zero
n4 International character
set See below
n4 Country n4 Country n4 Country n4 Country
“0” USA “3” UK “6” Italy “9” Norway
“1” France “4” Denmark #1 “7” Spain #1 “A” Denmark #2
“2” Germany “5” Sweden “8” Japan “B” Spain #2
n4 Country
“C” Latin America
CODE
HEX
FUNCTION