Rice Lake Portable Group Animal Scale - MAS-P - Operators Manual - Manual (Page 17)

Assembly 6
2.5 Mount the 920i Weighcenter – Optional
1. Before installing the bracket a bead of silicone must be added. See Figure 2-7.
(Apply silicone where labeled adhesive)
2. Clean the wall tubes where bracket will mount and the space between the holes
on the mount bracket with mineral spirits.
3. Install the adhesive tape on the mounting bracket between the holes.
4. Place the mounting bracket onto the cage wall by pressing the adhesive tightly
to the cage.
5. Secure with four bolts.
Adhesive
Conduit Clamp
9/32Ø
Figure 2-7. Control Box Mounting