Rice Lake Portable Group Animal Scale - MAS-P - Operators Manual - Manual (Page 18)

7 MAS-P Animal Scale Operator’s Manual
2.5.1 Battery Mount – Optional
Note
The mounting of the optional battery box differs slightly depending on
the scale size.
Figure 2-8. Battery Mount
1. Mount the upper mounting bracket with the 5/16 x 3/4” bolts supplied, utilizing
the existing wall panel bolt holes. See Figure 2-9.
2. Hang the battery bracket from the upper mount and install the 5/16 x 3/4” bolts
that are supplied.
3. Drill a 3/8” hole through the wall panel aligned with the lower mounting tab.
4. Sandwich the battery strap between the lower mount and the cage wall.
5. Install the 5/16 x 1/2” carriage bolt.
6. Route the indicator conduit from the control box to the battery as shown in
Figure 2-9.
7. Install the lower 90° conduit connector into the mounting tab.
8. Route the scale cable to the connector located to the left.
9. Route the power wire to the battery, see Figure 2-9.
8 x 13 Scale 8 x 18 Scale
Figure 2-9. Mounting Holes