Rice Lake RoughDeck Rough-n-Ready System - Manual (Page 16)

12 RoughDeck Low Profile Floor Scale Installation Manual
4.4 Replacement Parts List and Accessories
The following table list the pit frames, access ramps, and replacement part numbers for HP, HC, and HP-H model
RoughDeck floor scales.
4.4.1 Pit Frames
Table 4-3 shows the pit frames available for RoughDeck scales.
Table 4-3. RoughDeck Pit Frames
Platform Size Pit Frame for Model
ft. m HP/HC HP-H 20k HP-H 30k
2.5 x 2.5 .76 x .76 18757
3 x 3 .92 x .92 18759
4 x 4 1.22 x 1.22 18761 39595 39608
4 x 5 1.22 x 1.53 18765 39596 39609
4 x 6 1.22 x 1.83 18767 39597 39610
4 x 7 1.22 x 2.13 39598 39611
5 x 5 1.53 x 1.53 18763 39599 39612
5 x 6 1.53 x 1.83 18769 39600
5 x 7 1.53 x 2.13 18771 39601 39614
6 x 6 1.83 x 1.83 39602 39615
6 x 8 1.83 x 2.44 39604
7 x 9 2.13 x 2.74 39605
7 x 10 2.74 x 3.05 39606 39619
8 x 10 2.44 x 3.05 39607 39620
4.4.2 Access Ramps
Table 4-4 shows the standard access ramps available for the 2K-10K lb-capacity RoughDeck scales.
Table 4-4. RoughDeck Access Ramps (2K - Through 10K lb Models)
Ramp Width Ramp Length Ramp Height
Access Ramp for
Model
ft. m ft. m ft. m HP/HC
2.5 .76 3 .92 3.5 89 69040
3 .92 69041
4 1.22 69042
5 1.53 69043
2.5 .76 4 1.22 3.5 89 69184
3 .92 69185
4 1.22 69186
5 1.53 69187