Rice Lake SURVIVOR LaserLight Series Remote Display - ConnexLink Wireless Radio 900 MHZ Installation - Manual

October 24, 2013 157118
LaserLight ® Remote Display
ConnexLink ™ Wireless Radio 900 MHZ Installation Instructions
Available for PNs 75850, 75852
The ConnexLink Wireless Radio for the 4" and 6" LaserLight remote displays allows communication between the
remote display and an indicator with the matching radio installed.
See the LaserLight Installation Manual, PN 75936 for general installation, configuration and calibration
information.
1
2
3
4
6
5
10
7 9
WARNING
The LaserLight has no on/off switch. Before working with the unit, ensure the power cord is disconnected
from the power outlet.
Figure 1. Optional RF Transceiver Kit Illustration
Table 1. Optional ConnexLink Wireless Radio Kit (PN 93250) Parts List
Item No. Part No. Description Qty
1 109602 Bracket, Connexlink Radio 1
2 110612 Cord Grip, Modified 15628 1
3 110622 Cable Assy, Transceiver RF 1
4 110623 Cable Assy, Power Supply 1
5 129662 Pair Transceivers, RF 1
6 14621 Nut, Kep 6-32NC HEX 4
44251 Screw, Mach 6-32NCx3/8 4
7 15630 Locknut, 1/2 NPT Black 1
8 15631 Cable Tie, 3in Nylon 1
9 30376 Seal Ring, Nylon 1/2 NPT 1
10 Antenna 1