5 internal count and a/d count display, Internal count and a/d count display – Rice Lake Versa-portion, Rice Lake Weighing Systems User Manual
Page 12
6
Versa-portion RLP-S/SM Operation Manual
3.5
Internal Count and A/D Count Display
1.With the unit in weigh mode, press and hold the
ZERO
key.
2.With the
ZERO
key held, press and release the
TARE
key twice, then press and
release the
POWER
key.
The display will show
,,,,,0,
.
3.Press the
POWER
key to display the A/D count.
4.To return to weigh mode, press the
TARE
key.
Note
(G) uppercase is the abbreviation for gross.
(g) lowercase is the correct abbreviation for grams.
06
Auto tare clear when
rezero
0 - Allow
1 - Prohibit
Weight reset when tare
0 - Allow
1 - Prohibit
Tare auto clear
(Greater or equal to
Gross 21e and greater or
equal toNet 5e)
0 - Allow
1 - Prohibit
07
Zero tracking when Tare
0 - Allow
1 - Prohibit
Re-zero function
0 - Allow
1 - Prohibit
Additional zero for weight
when only fixed zeros are
displayed (V1.02 and
above)
0 - Allow (NTEP)
1 - Prohibit
08
Unit key (Not used on Versa-portion RLP-SM)
000 - No
001 - For g and lb conversion
010 - Not used
011 - G, lb and oz
100 - 111 Not used
SPEC
Number
Bit 2
Bit 1
Bit 0
Table 3-1. SPEC Number And Bit Explanation (Defaults Are Bold) (Continued)