Sage Barista Express BES870UK - Manual (Page 15)

14
oPEratIng yoUr nEW aPPlIanCE
PrE-ProgrammEd
SHot VolUmE – 2 CUP
Press the 2 CUP button once. A preset
double espresso volume of approx. 60ml
will be extracted. The machine will
automatically stop once the preset
volume has been extracted.
PROGRAMME
notE
Pressing the 1 CUP or 2 CUP buttons
during a programmed espresso will
immediately stop the extraction.
ProgrammIng SInglE ESPrESSo
1. To begin programming, press the
PROGRAMME button once. The
machine will beep once and the
program button will begin to flash.
This indicates the machine is in
programming mode.
2. Press 1 CUP button to start espresso
extraction. Press 1 CUP again once
desired volume of espresso has been
extracted. The machine will beep
twice to indicate the new 1 CUP
volume has been set.
ProgrammIng doUBlE ESPrESSo
1. To begin programming, press the
PROGRAMME button once. The
machine will beep once and the
program button will begin to flash.
This indicates the machine is in
programming mode.
2. Press 2 CUP button to start espresso
extraction. Press 2 CUP again once
desired volume of espresso has been
extracted. The machine will beep
twice to indicate the new 2 CUP
volume has been set.
rESEttIng dEfaUlt VolUmES
To reset the machine to the default
1 CUP and 2 CUP shot volumes and
espresso water temperature press and
hold the PROGRAMME button until the
machine beeps three times. Release the
PROGRAMME button. The machine will
return to its original default setting.
notE
Default settings: 1 CUP shot volume is
approx. 30ml. 2 CUP is approx. 60ml.
manUal ESPrESSo VolUmE
PROGRAMME
PRESS & HOLD
Press and hold the 1 CUP or 2 CUP button.
Release the button once sufficient espresso
has been extracted into the cup.
notE
For optimal flavour when using a
1 CUP filter basket, you should
extract approx. 30ml. When using a
2 cup filter basket, you should extract
approx. 60ml.