Char-Griller 5050 - Manual (Page 12)

Step 7
Attach the CATCH PAN to the underside of the GRILL BODIES using two (2) ½” BOLTS as
shown. Insert the BOLTS down through the GRILL BODY and then screw into the CATCH
PAN. Make sure that the side of the catch pan marked “Wheel Side” is on the side of the grill
with the wheels. From the rear of the grill, slide the GREASE TRAY into the guides/rails under
the CATCH PAN.
X X
WRONG
CORRECT
Step 8
Install the SIDE BURNER and the CONTROL PANEL to the firebox. Attach with eight (8) ½”
BOLTS and eight (8) LOCK WASHERS. From inside the GAS GRILL BODY the BOLTS will first
go through the Lock Washers then GRILL BODY and then screw into the SIDE BURNER
g g
or CONTROL PANEL. See Figures below.
X WRONG
HOSE
LOCATION
Note : the hose should be on
the outside of the leg brace.
Lock Washer
page 12
™ & © 2006 Char-Griller / A&J Mfg.