Char-Griller 5050 - Manual (Page 9)

Assembly
: Requires 2 people. Get another person to help.
Tools Needed
: Pliers, Phillips Head Screwdriver and a 7/16” Nut Driver.
NOTE
: Do Not tighten any bolts unless instructed to do so. Tightening too soon may prohibit
parts from fitting together. All Hex Nuts should be on the inside of the grill unless stated parts from fitting together. All Hex Nuts should be on the inside of the grill unless stated
otherwise. Unpack all contents in a well cleared and padded area.
Estimated Assembly Time: 45 minutes
STOP!
Do Not Return to Store. If you are missing parts or need assistance please email us at
[email protected] or call 912-638-4724. Do not attempt assembly if you are missing parts.
HARDWARE:
¼-20x 1 ½” BOLT……8 PCS
HARDWARE:
¼-20x1/2” BOLT….... 43 PCS
SCREW……………….3 PCS
¼” FLAT WASHER…10 PCS
¼-20 HEX NUT 19 PCS ¼-20 HEX NUT……..19 PCS
¼” LOCK WASHER…35 PCS
HINGE PINS………..2 PCS
HAIR COTTER PIN….3 PCS
page 9
CENTER HINGE PIN…1 PC
™ & © 2006 Char-Griller / A&J Mfg.