Char-Griller 5050 User Manual
Page 17
Step 21
Slide the GREASE TRAY into place on the guide rails under the Side Burner as shown below.
Insure that the GREASE TRAY is centered under the burner.
Grease Tray
Side Burner
Housing
Step 22
1. Place a standard 20 lb. Type 1 LP gas cylinder (see below, not included) into the cart assembly
and connect the cylinder with the gas hose/regulator as shown. (See page 19 for further
instructions).
2. Turn the Screw on the left side of the base panel clockwise to secure the standard 20 lb. LP
gas cylinder.
NOTE
: Hose must go
under and to the outside
of the leg brace.
Screw
Purging using a type 1 connection:
L.P. Gas cylinder evacuation can be accomplished during each purging by using a Type 1
connection. The Type 1 valve outlet has an external 1 5/16” ACME right hand tread which
will accept this connection.
page 17
™ & © 2006 Char-Griller / A&J Mfg.