ThingMagic Micro Hardware - Manual (Page 58)

Protocol Support
A D I V I S I O N O F T R I M B L E
Functionality of the Micro 53
Protocol Support
The Micro has the ability to support many different tag protocols. Using the MercuryAPI
ReadPlan classes the Micro can be configured to single or multi-protocol Read
operations. The current protocols supported are (some may require a license to enable):
ISO 18000-6C (Gen2)
I-PX
ISO 18000-6B
ISO 18000-6C (Gen2)
Protocol Configuration Options
The Micro supports multiple ISO-18000-6C profiles including the ability to specify the Link
Frequency, encoding schemes, Tari value and modulation scheme. The protocol options
are set in the MercuryAPI Reader Configuration Parameters (/reader/gen2/*). The
following table shows the supported combinations:
Note
It is important that the /reader/baudRate is greater than /reader/
gen2/BLF, in equivalent frequency units. If its not then the reader could be
Backscatter
Link Frequency
(kHz)
Encoding
Tari
(usec)
Modulation
Scheme
Notes
250 Miller (M=8) 12.5 PR-ASK
250 Miller (M=4) 12.5 PR-ASK
250 Miller (M=2) 12.5 PR-ASK
250 FM0 12.5 PR-ASK
250 Miller (M=8) 25 PR-ASK
250 Miller (M=4) 25 PR-ASK Default
250 Miller (M=2) 25 PR-ASK
250 FM0 25 PR-ASK
250 Miller (M=8) 25 PR-ASK
640 FM0 6.25 PR-ASK Not supported in PRC
Region