ThingMagic Micro Hardware - Manual (Page 59)

Protocol Support
A D I V I S I O N O F T R I M B L E
54 Functionality of the Micro
reading data faster than the transport can handle and send, and the reader’s
buffer might fill up.
Protocol Specific Functionality
See the MercuryAPI Programmers Guide and language specific reference guides for
details on supported Gen2 command functionality.
I-PX
Protocol Configuration Options
The Micro supports multiple I-PX profiles including the ability to specify the Return Link
Frequency, encoding and modulation scheme. The two profiles are treated as distinct
protocols, the individual parameters are not configurable as with the other protocols. The
following table shows the supported combinations:
Note
The two link rates are effectively two different protocols and treated as such.
I-PX tags are fixed to one of the two frequencies and cannot communicate
on the other, unlike ISO 18000-6B/C tags which can operate under multiple
profiles.
ISO 18000-6B
Protocol Configuration Options
The Micro supports multiple ISO-18000-6B profiles including the ability to specify the
Return Link Frequency, encoding, Forward Link Rate and modulation scheme. The
Return Link
Freq (kHz)
Modulation
Scheme
Notes
64 PWM Protocol ID = TagProtocol.IPX64
256 PWM Protocol ID = TagProtocol.IPX256