ThingMagic Micro Hardware - Manual (Page 85)

Protocol Faults
A D I V I S I O N O F T R I M B L E
80 Appendix A: Error Messages
FAULT_GEN2 PROTOCOL_NON_SPECIFIC_ERROR - 42Fh
Cause
This is an error returned by Gen2 tags. The tag does not support error specific codes.
Solution
Check the data that is being written and where its being written to in the command
resulting in this error. Try with a different tag.
FAULT_GEN2 PROTOCOL_UNKNOWN_ERROR - 430h
Cause
This is an error returned by Micro when no more error information is available about why
the operation failed.
Solution
Check the data that is being written and where its being written to in the command
resulting in this error. Try with a different tag.