ThingMagic Universal Reader Assistant 2.6 - Manual (Page 29)

Tag Operations
Universal Reader Assistant v2.6 User Guide 29
Figure 13: Tag Inspector
User Memory Editor
The User Memory Editor tag operation tab allows the contents of User Memory of specific
tags to be viewed and updated. The tag the operation will be applied to follows the rules
defined in the two Tag Operations
Workflows .
Once the tag to operate on has been set the User Memory Editor tab supports the
following workflow:
1. The contents of User Memory to be read and written can be represented in two
ways:
 Addressible Hexidecimal - direct hexidecimal representation of the raw data
on the tag. In this mode the data is displayed as individual bytes in a grid
showing the specific address within the User Memory bank. Modified, but not
yet written, data will be shown in red.