Torbal AGCN200 - Manual (Page 36)

Instruction Manual - TORBAL AGCN Series
6. Commands H2O (distilled water), ETHANOL, and OTHER will scroll sequentially. Select the liquid that
will be used in this density calculation by pressing the T key when the corresponding command is displayed.
NOTE:
If you are using a liquid other than H2O (distilled water) or ETHANOL, select OTHER by pressing the T
key and key in the density value of the liquid that will be used. To key in the density value of the liquid, use the
following keys: the C key to increment a digit, the T key to accept and go to the next digit, and MENU to accept
the setting.
7. Once the liquid for your density calculation has been selected, command t °C will be displayed indicating to
key in the temperature of the liquid. Key in the temperature of the liquid with a precision to 0.5 (half a degree
Celsius). To key in the temperature of the liquid, use the following keys: the C key to increment a digit, the T
key to accept and go to the next digit, the P key to insert a decimal, and MENU to accept the setting.
36