Torbal FA Series - Manual (Page 10)

- 10 -
Instruction Manual – FA Series Force Gauge
Main Keys
ON/OFF Power On and Off (standby)
UNIT/CLEAR Change units, Cancel selection, or Change a parameter value
BACKLIGHT Turn Illumination On/Off (ECO Mode)
ENTER Confirm command, Select an option or digit
(→0←)
Zero / Tare
Navigation Keys
↑
Move cursor up or increase the value of selected digit
↓
Move cursor down or decrease the value of selected digit
→
Move to the next menu level or display the next option
←
Move to the previous menu level or display the previous option
ENTER Confirm the entered parameter or select a highlighted option
Function Keys
MENU Meter function menu
PEAK Measures the maximum value
MEM Save the result to memory (press and hold for save menu)
PRINT Print results
Indicators
Indicates that the weighing result has stabilized
OFF Appears after turning off the gauge
SLW/FST Slow/fast measurement mode (10Hz/40Hz)
ACQ Device will automatically acquire measurements
AUT Automatic zeroing is on
Indicates the type of force being applied and the current force’s proximity
to capacity. NOTE: (capacity is at “+” and “-“)
Force Gauge with Internal Load Cell: “+” = push force “-“ = pull force
Force Gauge with External Load Cell: “+” = pull force” “-“ = push force
Chapter 4: Keys and Display Indicators
CONTINOUS MEASUREMENT
ACQ AUT
1.00N

-
-
 +
