Torbal FA Series - Manual (Page 33)

- 33 -
Instruction Manual – FA Series Force Gauge
The FA Series force gauge offers a variety of additional attachments that can be used in the measurement of
objects. These attachments are all available for purchase through
www.forcemeters.com .
 This chrome-plated allen vise clamp is ideal
when performing peel testing, or gripping thin
material such as film, paper, or foil. The vise
is equipped with an adjustable allen screw and
interlocking claps which allow for secure
sample griping without damage.
 This chrome-plated manual C-Clamp is
designed to secure samples on the testing
stand. The clamp also easily attaches to the
force gauge and it is ideal for making
measurement on wide range of sample shapes
and sizes. This attachment should be used
when testing samples that need to be gripped
over a large surface area.
 The roller grip attachment is used when
measuring tape strength as well as tape
adhesives. The grip is ideal for testing any
sample that needs to be draped in order to
obtain an accurate force measurement.
 The two grip handle adapter is especially
useful when performing force measurements
between 200N and 500N. The handle securely
mounts the force gauge meter allowing users
a comfortable and firm grip when pulling ir
pushing objects that require extensive force.
 The hook plate allows the TORBAL force
gauges to be securely suspended in a hanging
position. The kook can be used on all FA
models with built-in load-cells. Hanging the
force gauge is particularly useful when
measuring articles which must be hung on the
force meter in order to measure downward
pull forces.
Chapter 16: Additional Attachments