Chapter 5: functions, descriptions, definitions – Torbal FA Series User Manual
Page 11
- 11 -
Instruction Manual
– FA Series Force Gauge
Peak Measuring allows the user to record peak values for both compression (push) and tension (pull)
measurements.
Min/Max Threshold Measuring allows the user to select parameters for their measurement with a
buzzer to signal if they exceed the selected parameters.
Data Storing allows the user to save their data either in the RAM of the device or in any of 8 open files
of 800 samples each.
Measure Speed allows the user to set the speed at which the force gauge takes measurements. This is
useful when trying to be precise with measurements. Offered at 10Hz (slow) and 40Hz (fast).
Internal Calibration is used to calibrate the force gauge with an external calibration mass or by
configuring your geographical location parameters.
Statistic Graphing is used to chart the results of a sample of measurements. Results can be viewed in a
bar graph or an axis graph.
Chapter 5: Functions, Descriptions, Definitions