CITIZEN PPU-231 - Manual (Page 20)

PPU-231 User’s Manual
7 CITIZEN
2.3 Paper Specifications
2.3.1 Recommended Paper
• Type
: Thermal paper
• Paper width
: 80 + 0/- 1 mm
• Paper thickness
: 60
∼ 85µm
• Roll diameter
:
φ203 mm or less (When using PHU)
• Printing surface
: Outside of the roll (Surface)
• Recommended paper
: TF50KS-E, E2C (Monochrome) made by NIPPON SEISHI or its equivalent
• Core
:
φ25.4 mm (Inner diameter)
CAUTION:
1) Use of non-specified paper may cause irregularity of print density. If this is the case, use the DIP switch
to reset print density. (See 5. DIP SWITCH SETTING)
2) Do not paste the paper to the core.
3) If the paper comes in contact with a chemical or oil, it may discolor or lose a record.
4) Do not rub the paper surface strongly with a nail or hard metal. It may discolor.
5) Discoloring starts at about 70 °C . Watch out for effects of heat, humidity, light, and so on.
2.3.2 Printing Position