Tycon Power TP-MS608/616 - Manual (Page 12)

User’s Manual TP-MS608/616
12
TYCON POWER SYSTEMS
14. UART: You must set UART Control to RS232,9600,8,N,1 for PoE operation.
Mode: Set to RS232 for PoE operation.
Baud rate: Set to 9600 bps for PoE operation.
Character Bits: Set to 8 bits for PoE operation.
Parity Type: Set to none parity for PoE operation.
Stop Bit: Set to 1 stop bit for PoE operation.
Hardware Flow Control: Set to none flow control for PoE operation.
When you have finished the set up, click on Update to update your setting.