Tycon Power TP-MS608/616 - Manual (Page 22)

User’s Manual TP-MS608/616
22
TYCON POWER SYSTEMS
Station and Status Window Select
The PSE management software can monitor 8 PSE simultaneously. In the GUI
Disconnect mode, only the TCP/IP Status display window can be used to set the TCP/IP
parameter. In the GUI Connector mode, there three display windows can choose -
TCP/IP Status/Port Status/Board Status.
Port status and Board Status show relative PSE Station status. If you want to change the
status display window, only use the mouse to choose the relative word icon. If you want to
change the station, also use the mouse to choose the station name icon.
Station Select display icon Status display icon