Tycon Power TP-MS608/616 - Manual (Page 3)

User’s Manual TP-MS608/616
3
TYCON POWER SYSTEMS
1. Introduction
TYCON’s family of Power over Ethernet PSE (Power Sourcing Equipment), injects
power over data-carrying Ethernet cabling. The TP-MS608/616, support 8 and 16 ports
respectively in a 10/100/1000BaseTx Ethernet network, over TIA/EIA-568 Category
5/5e/6 cabling. DC operating power, for data terminal units, is fed over data pairs of the
cabling (4/5 and 7/8). This allows greater flexibility in the locating of network devices
and significantly decreasing installation costs in many cases.
The TP-MS608/616 follows the IEEE 802.3af/IEEE 802.3at and is completely
compatible with existing Ethernet switches and networked devices. Normally powers
PDs (Powered Devices) that are Power over Ethernet enabled or are equipped to
receive power over Ethernet. The PSE tests whether a networked device is
PoE-capable, power is never transmitted unless a Powered Device is at other end of
the cable. It also continues to monitor the channel. If the Powered Device does not
draw a minimum current, because it has been unplugged or physically turned off, the
PSE shuts down the power to that port. Devices that are not equipped to receive power
over Ethernet may require an external splitter in order to be powered. Contact Mstronic
for such a splitter.
Features
8/16 port Power Sourcing Equipment ( power over Ethernet Hub)
Support 8/16 ports full load, max. 576W
AC input (100-240 VAC, 50/60 Hz)
IEEE802.3af/IEEE 802.3at compliance, Power over Ethernet Mid-Span mode
Remote power feeding of Ethernet terminals up to 100 meters
Auto detect PD, and support manual detect PD
Centralized power distribution for PoE powered Device (PD)
Independent overload and short-circuit protection per channel
Supports IEEE 802.3af/IEEE 802.3at non-standard device
Auto refresh port status and support Plug and Play feature for PD
Standard 19” or 23” rack mountable
DIY upgrade from 8 port to 16 port available
Remote manage up to 8 units via TCP/IP protocol
DC input available, can work with battery, non-interrupt performance.