Welch Allyn Acuity and Mobile Acuity LT Central Monitoring Systems - User Manual User Manual
Page 109
Advertising
Directions for use
Chapter 6 Review or print patient data
105
Display waveforms and events
To select and adjust waveforms
1.
Check up to five boxes to display waveforms for corresponding vital-signs and ECG
lead sources.
If the patient monitor includes SpO
2
Signal IQ detection and you check SpO
2
, SIQ
occupies a waveform slot in the display.
2.
Click Scales, and then make a selection.
3.
Click under mm/sec to adjust sweep speeds.
To adjust the period shown in the window
1.
Click on the time line to display waveforms from a different time period.
Along the time line, patient alarms are red.
2.
Scroll the waveforms.
Click
or
to scroll forward or backward.
Click
or
to page forward or backward.
Time Line
Beat labels: Normal (
•
) and ventricular (
v
)
Advertising