Activate through the simple user interface – Welch Allyn Service Tool, Installation and Configuration - Installation Guide User Manual
Page 15
Advertising
Welch Allyn Service Tool
12
Chapter 3 Operation
Activate through the simple user interface
1. Go to the Windows Start menu, and select All Programs >
Welch Allyn > Welch Allyn Service Tool. The simple user
interface appears:
2. Click Add new features.
3. Follow the instructions on the screen. If activation fails,
see
4. When activation is complete, disconnect the USB cable from the
device, and power down the device as described in its
documentation.
Note
If this is not the screen you see, go to
Simply activate
device features
(with a device
license).
Access the full
service tool
application (or
activate a Gold
license).
Advertising