Welch Allyn Service Tool, Installation and Configuration - Installation Guide - Manual (Page 16)

Welch Allyn Service Tool 13 Chapter 3 Operation
Activate through the Administration menu
1. Go to the Windows Start menu, and select All Programs >
Welch Allyn > Welch Allyn Service Tool. The main screen
appears.
2. If prompted, log on. For details, see “Log on for the first time” on
page 15.
3. Click Administration > Install license. The Install license screen
appears.
4. Select Medical device license.
5. Connect the USB cable to the mini-B USB port on the
Welch Allyn device and the opposite end of the USB cable to the
PC.
6. If the device is powered down, power it up.
7. If more than one device is connected, select the device you want
to license from the list.
8. Under Connected and maintained devices, click the device and
then click Select.
Note If this is not the screen you see, go to “Activate through
the simple user interface” on page 12.