Cisco 7925G-EX - Manual (Page 16)

8-16
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
Chapter 8 Viewing Security, Device, Model, Status, and Call Statistics Information on the Phone
Viewing the Phone Status Menu
Viewing Firmware Versions
You can verify the firmware versions that are used on the Cisco Unified Wireless IP Phone 7925G,
7925G-EX, and 7926G by viewing the Firmware Info screen. The firmware version name is in this
format:
Product_Name-Model-Protocol.Version Number.Filetype
An example of the firmware release for the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and
7926G is cmterm-7925-sccp.X-0-0.cop.sgn.
Table 8-7 explains the information that is displayed on this screen.
To display the firmware information, follow these steps:
Procedure
Step 1 Choose SETTINGS > Status.
Step 2 Select Firmware Versions.
Step 3 To view one of the items, scroll to the item and press Select.
Step 4 To exit the Firmware Versions screen, press Back.
Related Topics
• Viewing the Status Messages, page 8-9
• Viewing Network Statistics, page 8-12
• Viewing Call Statistics, page 8-13
Table 8-7 Firmware Version Information
Item Description
App Load ID Identifies the phone firmware version running in the phone
Boot Load ID Identifies the factory-installed load running on the phone
WLAN Driver ID Identifies the version of the wireless LAN driver
WLAN Firmware ID Identifies the Wireless LAN firmware version running in the phone