Cisco 7925G-EX - Manual (Page 4)

8-4
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
Chapter 8 Viewing Security, Device, Model, Status, and Call Statistics Information on the Phone
Viewing Device Information
Step 1 Choosing Settings > Security Configuration > Trust List.
Step 2 To exit the Trust List screen, press the Exit softkey.
The Trust List screen contains these options:
• CAPF Server—IP address of the CAPF used by the phone. Also displays a certificate icon if a
certificate is installed for this server.
• Communications Manager / TFPT Server—IP address of a Cisco Unified Communications Manager
and TFTP server used by the phone. Also displays a certificate
icon if a certificate is installed
for this server.
• SRST Router—IP address of the trusted SRST router that is available to the phone, if such a device
has been configured in Cisco Unified Communications Manager Administration. Also displays a
certificate
icon if a certificate is installed for this server.
Related Topics
• Viewing the Status Messages, page 8-9
• Viewing Call Statistics, page 8-13
• Viewing Firmware Versions, page 8-16
Viewing Device Information
You can access the Device Information screen on the Cisco Unified Wireless IP Phone 7925G,
7925G-EX, and 7926G and to view information about the current configuration:
• Cisco Unified Communications Manager servers
• Network settings
• WLAN information
• HTTP information
• Locale information
• Security settings
• QoS information
To view the Device Information screen, follow these steps:
Procedure
Step 1 Choose Settings menu> Device Information.
Step 2 Use the Navigation button to scroll to one of the categories in the Device Information screen and press
Select.
The list of items under the category displays.
Table 8-2 describes the categories and items that appear in this screen.
Step 3 To exit the Device Information screen, press the Back softkey.