Further inquiries, Future updates, Crestron din-pws50 din rail 50 watt cresnet – Crestron electronic DIN-PWS50 User Manual

Page 19: Power supply

Advertising
background image

Crestron DIN-PWS50

DIN Rail 50 Watt Cresnet

®

Power Supply

NOTE: All Crestron certified Cresnet wiring must consist of two
twisted pairs. One twisted pair is the +24V conductor and the GND
conductor and the other twisted pair is the Y conductor and the Z
conductor.

Strip and Tin
Wire

When daisy-chaining Cresnet units, strip the ends of the wires carefully
to avoid nicking the conductors. Twist together the ends of the wires that
share a pin on the network connector and tin the twisted connection.
Apply solder only to the ends of the twisted wires. Avoid tinning too far
up the wires or the end becomes brittle. Insert the tinned connection into
the Cresnet connector and tighten the retaining screw. Repeat the
procedure for the other three conductors.

Add Hubs

Use of a Cresnet hub/repeater (DIN-HUB) is advised whenever the
number of Cresnet devices on a network exceeds 20 or when the
combined total length of Cresnet cable exceeds 914 meters (3000 feet).

Further Inquiries

If you cannot locate specific information or have questions after
reviewing this guide, please take advantage of Crestron's award winning
customer service team by calling Crestron at 1-888-CRESTRON
[1-888-273-7876].
You can also log onto the online help section of the Crestron website
(

www.crestron.com/onlinehelp

) to ask questions about Crestron products.

First-time users will need to establish a user account to fully benefit from
all available features.

Future Updates

As Crestron improves functions, adds new features and extends the
capabilities of the DIN-PWS50, additional information may be made
available as manual updates. These updates are solely electronic and
serve as intermediary supplements prior to the release of a complete
technical documentation revision.
Check the Crestron website periodically for manual update availability
and its relevance. Updates are identified as an “Addendum” in the
Download column.

Operations & Installation Guide – DOC. 6667A

DIN Rail Power Supply: DIN-PWS50

15

Advertising