Crestron electronic DIN-PWS50 - Manual (Page 7)

Crestron DIN-PWS50 DIN Rail 50 Watt Cresnet
®
Power Supply
Specifications
Specifications for the DIN-PWS50 are listed in the following table.
DIN-PWS50 Specifications
SPECIFICATION DETAILS
Output Power
Per Output Port 50 Watts (2.08 Amps @ 24 Volts
DC, Regulated), limited power
source
Module Total 50 Watts (2.08 Amps @ 24 Volts
DC, Regulated)
Ripple/Noise <1%
Power Requirements 60 Watts @ 100-240V, 50/60 Hz
Environmental
Temperature
0º to 40º C (32º to 104º F)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation 26 BTU/Hr
Enclosure Light gray polycarbonate housing
with polycarbonate label overlay,
UL94 V-0 rated, 35 mm DIN EN
60715 rail mount, DIN 43880 form
factor for enclosures with 45 mm
front panel cutout, occupies 6 DIN
module spaces (108 mm)
Dimensions
Height
94.2 mm (3.71 in)
Width 106 mm (4.18 in)
Depth 58 mm (2.29 in)
Weight 170 g (6 oz)
Available Accessories
DIN-BLOCK DIN Rail Cresnet Distribution Block
DIN-HUB DIN Rail Cresnet Distribution Hub
Operations & Installation Guide – DOC. 6667A DIN Rail Power Supply: DIN-PWS50 • 3