B&C Technologies HP Series Commercial - Manual (Page 14)

Installation
Inspection and Uncrating
13
Delivery inspection
Upon delivery, visually inspect crate,
protective cover, and unit for any visible
shipping damage. If the crate, protective
cover, or unit are damaged or signs of
possible damage are evident, have the
carrier note the condition on the shipping
document before the shipping receipt is
signed, or advise the carrier of the
conditions as soon as it is discovered.
Remove the crate and protective cover as
soon after delivery as possible. if any
damage is discovered upon removal of the
crate and/or protective cover, advise the
carrier and file a written claim immediately.
Customer Service
If literature or replacement parts are
required contact the source from whom the
machine was purchased or contact :
B&C Technologies
(850) 249-2222
(850) 249-2226 FAX
[email protected]
www.bandctech.com
for the name of the nearest authorized parts
distributor.
A record of each machine is on file with the
manufacturer. The serial number decal is
located at the rear of the machine. Always
provide the machine’s serial number and
model number when ordering parts or
when seeking technical assistance.
NOTE!
Keep the manuals, installation instructions
and the wiring diagrams which accompany
the machine in a safe place for ready
reference. They have been included with
the machine at no charge. Additional copies
are available at a nominal charge.