B&C Technologies DE Series Commercial - Manual (Page 38)

4. ALL returns must be properly packaged to insure that they are not damaged in transit. Dam-
age claims are the responsibility of the shipper.
IMPORTANT: No replacements, credits, or refunds will be issued for merchandise damaged
in transit.
5. ALL returns should be shipped to B&C Technologies in such a manner that they are insured
and a proof of delivery can be obtained by the sender.
6. Shipping charges are not the responsibility of B&C Technoloiges. ALL returns should be
prepaid to the factory. Any C.O.D. or COLLECT returns will not be accepted.
IMPORTANT: NO replacements, credits, or refunds will be issued if the claim cannot be processed
due to insufficient information.
6.2 Routine Maintenance
6.2.1 Cleaning
A program and/or schedule should be established for periodic inspection, cleaning and removal of
lint from various areas of the dryer, as well as throughout the duct work system. The frequency of
cleaning can best be determined from experience at each location. Maximum operating efficiency
is dependent upon proper air circulation. The accumulation of lint can restrict this air flow. If the
guidelines in this section are met, your dryer will provide many years of efficient, trouble-free,
and most importantly, safe operation.
WARNING: LINT FROM MOST FABRICS IS HIGHLY COMBUSTIBLE. THE ACCUMULA-
TION OF LINT CAN CREATE A POTENTIAL FIRE HAZARD.
WARNING: KEEP DRYER AREA CLEAR AND FREE FROM COMBUSTIBLE MATERIALS,
GASOLINE AND OTHER FLAMMABLE VAPORS AND LIQUIDS.
NOTE: Suggested time intervals shown are for average usage which is considered 6 to 8 opera-
tional (running) hours per day.
CLEAN LINT FROM LINT DRAWER / SCREEN A MINIMUM OF EVERY THIRD OR FOURTH
LOAD - EVERY LOAD FOR NEW GOODS.
NOTE: Frequency can best be determined at each location.
6.2.2 Maintenance Intervals
DAILY (beginning of each work shift)
Inspect lint screen and replace if torn.
WEEKLY
35