B&C Technologies M720 Dryer Control (DE, DP, DI Series) - Manual (Page 10)

When a drying or cool-down cycle is active, the adjusted drying or cool-down time is set at
the moment the drying or cool-down cycle starts. Sometimes it is necessary to manually ad-
just the time to a higher or lower value. This can be done with these buttons in combination
with the S
HIFT key (see item 10). If the S HIFT key (see item 10) is pressed in combination
with the INCREASE CYCLE TIME key ( ), the current time remaining in the drying or
cool-down cycle will be increased by 5 minutes. If the S HIFT key (see item 10) is pressed in
combination with the DECREASE CYCLE TIME ( ) key, the current time remaining in the
drying or cool-down cycle will be decreased by 5 minutes. Please note that these changes in
time are temporary. They do not change the programmed value in the active program. Also,
if a temporary change is made in the drying cycle of the program, this does not influence the
cool-down time setting programmed.
7